Fire alarm system field devices

• Alarm devices
• Beam detectors
• Conventional detectors
• Detectors
• Duct detectors
• Ex detectors
• I/O units
• Installation accessories
• Manual call points
• Wireless devices

• 

  Panasonic · 41530

  Panasonic 2820 ATEX galvanic isolator MTL5561

  Two-channel galvanic isolator (MTL5561) for conventional fire and smoke detectors located in a hazardous area. The isolator is installed in the safe area.

  + Add to quote request
• 

  Panasonic · 41316

  Panasonic 4461 I/O unit with short-circuit isolator

  Addressable multi-function I/O unit with two relay outputs, a supervised input (also usable as a conventional detection zone), an opto-isolated input and a general-purpose input. Built-in short-circuit isolator, IP65.

  + Add to quote request
• 

  Panasonic · 41270

  Panasonic 4466 addressable power supply

  Addressable external 24 V DC power supply with battery backup. Connected to the COM loop for monitoring, it supplies alarm devices and fire door holding magnets, for example.

  + Add to quote request
• 

  Panasonic · 41391

  Conventional manual call point IP66 CXL/GP/R/WP/470+680+LED/IP

  Red conventional manual call point with changeover contacts and LED indicator.

  + Add to quote request
• Panasonic

  Panasonic · 41613

  Panasonic 1040-000 single reflector prism adjustment bracket

  Adjustment bracket for one Fireray reflector prism. Used with reflective beam detectors when the reflector must be aimed towards the detector.

  + Add to quote request
• 

  Panasonic · 41441

  Panasonic 4452W conventional optical smoke detector

  Conventional optical smoke detector that is particularly good at detecting the large, light-coloured smoke particles of a smouldering fire. Connected to a detection zone of the fire alarm control panel via mounting base 2324.

  + Add to quote request
• 

  Panasonic · 41271

  Panasonic 4464 expansion board with two voltage outputs

  Addressable expansion board for the 4466 power supply: two supervised 24 V DC outputs for alarm devices, an output for closing fire doors and a general-purpose input. The board is addressed automatically.

  + Add to quote request
• 

  Panasonic · 41421

  Panasonic 4318W combined heat detector

  Conventional combined heat detector with a fixed alarm threshold of 59 °C and a rate-of-rise function (class A1R). Connected to a detection zone of the fire alarm control panel.

  + Add to quote request
• 

  Panasonic · 41272

  Panasonic 4585 COM loop repeater

  COM loop repeater installed in the 4466 external power supply. The repeater amplifies the loop signal and forms a sub-loop with a cable length of up to 1,100 m.

  + Add to quote request
• 

  Panasonic · 41282

  Panasonic 4401I analogue optical smoke detector with short-circuit isolator

  Analogue addressable optical smoke detector with a built-in short-circuit isolator. AI-based fire decision and a learning function reduce false alarms.

  + Add to quote request
• 

  Panasonic · 41362

  Panasonic 4460 addressable 230 V relay unit

  Addressable relay unit whose programmable relay output switches 230 V AC loads of up to 8 A. Suitable, for example, for closing fire doors; built-in short-circuit isolator and IP66/67 enclosure.

  + Add to quote request
• Panasonic

  Panasonic · 41572

  Panasonic 2814HC protective cover for ATEX manual call point

  Protective cover for the Panasonic 2814 manual call point.

  + Add to quote request
• 

  Panasonic · 41370

  Panasonic 3364 I/O unit, supervised 24 V outputs

  Addressable voltage output unit with two supervised 24 V DC outputs for alarm devices and one output for closing fire doors. Connected to the COM loop and an external 24 V supply.

  + Add to quote request
• Panasonic

  Panasonic · 41616

  Panasonic 1141-000 ceiling mount for end-to-end beam detector

  Ceiling mount for an end-to-end detector. The mount has a 200 mm (8-inch) drop rod and is suitable for one-way or two-way applications. Detector not included. For two-way use, additional bracket 3000-202 is required.

  + Add to quote request
• 

  Panasonic · 41576

  Panasonic 2841 intrinsically safe analogue heat detector

  Intrinsically safe addressable analogue heat detector for potentially explosive atmospheres (zones 0, 1 and 2). The detector is connected to the COM loop via IS isolator unit 2842.

  + Add to quote request
• Panasonic

  Panasonic · 41277

  Panasonic 4472 end-of-line device, 1 pc

  Panasonic 4472 end-of-line device for use with alarm devices. Sales unit 1 pc.

  + Add to quote request
• Panasonic

  Panasonic · 41273

  Panasonic 4472 end-of-line device, 5 pcs

  Panasonic 4472 end-of-line device for use with alarm devices. Pack of 5.

  + Add to quote request
• 

  Panasonic · 41396

  Panasonic 4482RE addressable sounder beacon, red

  Addressable wall-mounted sounder beacon: an EN 54-3 sounder and an EN 54-23 beacon in one device, plus a built-in short-circuit isolator. Powered from the COM loop.

  + Add to quote request
• Panasonic

  Panasonic · 41399

  Panasonic 4479-B addressable base sounder

  Addressable base sounder for the 4400I multi-sensor detector. Brings a 90 dB(A) alarm sound into the same space as the detector; seven tones and three priority levels.

  + Add to quote request
• 

  Panasonic · 41392

  Panasonic 4480WH addressable wall-mounted beacon, white

  Addressable EN 54-23 wall-mounted beacon with a built-in short-circuit isolator. Coverage W-2.4-5.0, i.e. 5 × 5 m, for corridors, offices and toilets, for example.

  + Add to quote request
• 

  E2S · 42073

  E2S IS-A105N-R sounder ATEX/IECEx/FM, IP66, red

  Intrinsically safe (Ex ia) sounder for zone 0 hazardous areas. Sound level 105 dB(A), 49 selectable tones and an IP66 enclosure; red.

  + Add to quote request
• 

  E2S · 42072

  E2S IS-mA1-R mini sounder ATEX/IECEx/FM, IP65

  Compact, intrinsically safe (Ex ia) sounder for zone 0 hazardous areas. Sound level 100 dB(A), 49 tones and IP65; also approved to EN 54-3.

  + Add to quote request
• 

  Panasonic · 41381

  Conventional manual call point CXL/GP/R/BB/470

  Red conventional manual call point with changeover contacts, IP24.

  + Add to quote request
• Panasonic

  Panasonic · 42659

  4990010FUL-0045 resettable plastic call point element, 10 pcs

  Resettable plastic element for Panasonic conventional call points, 10 pcs.

  + Add to quote request
• 

  Panasonic · 42070

  Fire bell 6" 24 V CFB6D24

  Red 6-inch fire bell for 24 V. The sound level is up to 95 dB(A). The bell is tested and approved to EN 54-3, and its IP rating is IP21.

  + Add to quote request
• Panasonic

  Panasonic · 41614

  Panasonic 1050-000 adjustment bracket for four reflector prisms

  Prism plate and adjustment bracket for four prisms (prisms not included). Provides 360° rotation and 98° adjustment.

  + Add to quote request
• Panasonic

  Panasonic · 41609

  Panasonic 1060-000 anti-condensation heater

  Anti-condensation heater: a 24 V (AC or DC), 20 W heater that reduces condensation on the lens of the Fireray One detector. Detector not included.

  + Add to quote request
• Panasonic

  Panasonic · 41611

  Panasonic 1100-000 protective cage for Fireray One detector

  Protective cage for the Fireray One detector. Mounted either on the 1260-000 back box or on a flat surface.

  + Add to quote request
• Panasonic

  Panasonic · 41610

  Panasonic 1140-000 ceiling mount for reflective beam detector

  Beam detector ceiling mount (white). Suspension bracket for reflective detector heads. The ceiling mount has a 300 mm (12-inch) drop rod, which can be used to install a Fireray One or Fireray 5000 detector head.

  + Add to quote request
• Panasonic

  Panasonic · 41615

  Panasonic 1150-000 commissioning and maintenance kit

  Commissioning and maintenance kit for testing fire and fault conditions after installation (includes a cleaning cloth).

  + Add to quote request
• Panasonic

  Panasonic · 41608

  Panasonic 1170-000 Fireray detector adjustment bracket

  Adjustment bracket for Fireray One, 5000 and 3000 models. Provides 360° rotation and 130° adjustment.

  + Add to quote request
• 

  Panasonic · 42140

  Panasonic 2218 remote indicator

  Remote indicator (LED) connected to the detector mounting base. Used when the detector is concealed or out of sight, for example above a suspended ceiling.

  + Add to quote request
• 

  Panasonic · 41471

  Panasonic 2324W conventional mounting base

  White mounting base for Panasonic conventional detectors. Screw terminals, built-in alarm indicator and connection for a remote indicator.

  + Add to quote request
• Panasonic

  Panasonic · 42632

  Panasonic 2348 polycarbonate cover for manual call point

  Transparent polycarbonate cover for manual call points that protects the call point against accidental operation.

  + Add to quote request
• Panasonic

  Panasonic · 41612

  Panasonic 23901.01 reflector prism

  Prism for reflective infrared beam detectors.

  + Add to quote request
• 

  Panasonic · 41540

  Panasonic 2810 ATEX optical smoke detector SLR-E-IS

  Intrinsically safe (Ex ia) conventional optical smoke detector for hazardous areas. The detector is connected to the fire alarm control panel via a Zener barrier or galvanic isolator.

  + Add to quote request
• 

  Panasonic · 41550

  Panasonic 2811 ATEX heat detector DCD-1E-IS

  Intrinsically safe (IS) conventional heat detector for hazardous areas. A rate-of-rise detector that also has a fixed trigger temperature of 60 °C.

  + Add to quote request
• 

  Panasonic · 41560

  Panasonic 2812 ATEX mounting base

  Low-profile mounting base without electronics for intrinsically safe (IS) conventional detectors in hazardous areas. The base is only 8 mm high.

  + Add to quote request
• 

  Panasonic · 41570

  Panasonic 2814 ATEX manual call point CCP-E-IS

  Intrinsically safe (Ex ia) conventional manual call point for hazardous areas. The call point is based on Hochiki’s KAC World Series housing and operates with either a breakable glass element or a non-breaking plastic element.

  + Add to quote request
• Panasonic

  Panasonic · 41571

  Panasonic 2814BB surface-mount back box for ATEX manual call point

  Surface-mount back box for the Panasonic 2814 manual call point.

  + Add to quote request
• 

  Panasonic · 41575

  Panasonic 2840 intrinsically safe addressable smoke detector

  Addressable, intrinsically safe (IS) optical smoke detector for hazardous areas. Connected to the COM loop of a Panasonic fire alarm control panel via the 2842 IS isolator unit.

  + Add to quote request
• 

  Panasonic · 41577

  Panasonic 2842 intrinsically safe isolator unit

  Intrinsically safe isolator unit for connecting the 2840 and 2841 addressable IS detectors to the COM loop of a Panasonic fire alarm control panel. Installed outside the Ex area.

  + Add to quote request
• 

  Panasonic · 41578

  Panasonic 2843 intrinsically safe detector mounting box

  Waterproof mounting box for the 2840 and 2841 addressable IS detectors. Raises the ingress protection of the smoke detector to IP44 and of the heat detector to IP66/67 in hazardous areas.

  + Add to quote request
• Panasonic

  Panasonic · 41605

  Panasonic 3000-015 Fireray 3000 additional detector pack

  Additional detector pack for the Fireray 3000 beam detector: transmitter and receiver without a controller. Used to connect a second detector line (5–120 m) to the same controller.

  + Add to quote request
• 

  Panasonic · 41607

  Panasonic 3000-026 Fireray 3000 Ex d additional detector pack

  Additional detector pack for the Fireray 3000 Ex d beam detector system. The pack contains a flameproof transmitter and receiver with brackets for connecting a second detector pair to the same controller.

  + Add to quote request
• 

  Panasonic · 41606

  Panasonic 3000-115 Fireray 3000 Ex d, ATEX

  Flameproof end-to-end beam detector system for smoke detection in large hazardous areas. The system comprises an Ex d transmitter and receiver and a controller installed in a safe area.

  + Add to quote request
• Panasonic

  Panasonic · 41617

  Panasonic 3000-204 anti-condensation heater for Fireray 3000 detector

  Anti-condensation heater for the transmitter and receiver of the Fireray 3000 beam detector. Prevents fogging and condensation on the detector heads in changing conditions.

  + Add to quote request
• 

  Panasonic · 41332

  Panasonic 3312FLW mounting base with push-in terminals and indicator connection

  White analogue mounting base for Panasonic addressable heat, smoke and multi-sensor detectors. Push-in terminals for both the COM loop and an external indicator speed up installation.

  + Add to quote request
• 

  Panasonic · 41331

  Panasonic 3312FW mounting base with push-in terminals

  White analogue mounting base for Panasonic addressable heat, smoke and multi-sensor detectors. Push-in terminals for the COM loop speed up installation; no connection for an external indicator.

  + Add to quote request
• 

  Panasonic · 41321

  Panasonic 3312W mounting base with screw terminals

  White analogue mounting base with screw terminals for Panasonic addressable heat, smoke and multi-sensor detectors. Terminals for the COM loop and an external indicator.

  + Add to quote request
• Panasonic

  Panasonic · 41343

  Panasonic 3313 cover for mounting base, 1 pc

  Plain protective cover for Panasonic 33xx series mounting bases. Protects the base when no detector is fitted, for example when addressable base sounder 3379 is used without a detector.

  + Add to quote request
• Panasonic

  Panasonic · 41342

  Panasonic 3313 cover for mounting base, 50 pcs

  Plain protective cover for Panasonic 33xx series mounting bases. Protects the base when no detector is fitted, for example when addressable base sounder 3379 is used without a detector. Pack of 50.

  + Add to quote request
• 

  Panasonic · 41410

  Panasonic 3379W addressable base sounder

  Addressable base sounder that combines an analogue detector base and a sounder. Brings the alarm sound into the same room as the detector without a separate sounder.

  + Add to quote request
• Panasonic

  Panasonic · 41582

  Panasonic 3401-205 prism heater

  Heater for beam detector prisms. 24 V AC/DC.

  + Add to quote request
• Panasonic

  Panasonic · 41601

  Panasonic 3404 Fireray long range kit

  Long range kit containing 3 reflective prisms. Intended for use with Fireray 5000 and Fireray One detectors to achieve a range of up to 100 metres.

  + Add to quote request
• 

  Panasonic · 41604

  Panasonic 3406 Fireray 3000

  End-to-end infrared beam detector for smoke detection in large and high spaces. The system comprises a transmitter, a receiver and a controller installed at low level.

  + Add to quote request
• 

  Panasonic · 41585

  Panasonic 3411 Fireray One beam detector

  Reflective motorised beam detector that automatically aligns itself to the reflector. The stand-alone detector suits, for example, warehouses and other large spaces where maintaining ceiling detectors is difficult.

  + Add to quote request
• 

  Panasonic · 41586

  Panasonic 3414 Fireray Hub beam detector

  Reflective optical beam detection system in which up to three motorised detectors are controlled and tested from a controller mounted at ground level. For smoke detection in large spaces such as atriums, warehouses and halls.

  + Add to quote request
• 

  Panasonic · 41417

  Panasonic 4381 addressable beacon with short-circuit isolator

  Addressable red beacon with a built-in short-circuit isolator. Supplements sounders, for example in toilets and other small public spaces.

  + Add to quote request
• 

  Panasonic · 41413

  Panasonic 4383 beacon base

  Addressable beacon base installed between an analogue detector base and the detector. Eight red LEDs give a light signal visible through 360° to support sounders.

  + Add to quote request
• 

  Panasonic · 41312

  Panasonic 4400I analogue multi-sensor detector with short-circuit isolator, white

  Addressable analogue multi-sensor detector that combines an optical smoke detector and a heat detector. A built-in short-circuit isolator and AI-based fire decision reduce false alarms.

  + Add to quote request
• Panasonic

  Panasonic · 41313

  Panasonic 4400I-B analogue multi-sensor detector with short-circuit isolator, black

  Addressable analogue multi-sensor detector that combines an optical smoke detector and a heat detector. A built-in short-circuit isolator and AI-based fire decision reduce false alarms.

  + Add to quote request
• 

  Panasonic · 41311

  Panasonic 4400W multi-sensor detector

  Analogue addressable multi-sensor detector with an optical smoke detector and a heat detector in the same low-profile housing. AI-based fire decision and a learning function reduce false alarms.

  + Add to quote request
• 

  Panasonic · 41281

  Panasonic 4401W optical smoke detector

  Analogue addressable optical smoke detector for Panasonic EBL fire alarm systems. AI-based fire decision, a learning function and contamination compensation reduce false alarms.

  + Add to quote request
• 

  Panasonic · 41314

  Panasonic 4402 multi-sensor detector with carbon monoxide detection

  Analogue addressable multi-sensor detector with an optical smoke detector, a heat detector and a carbon monoxide (CO) sensor. A smoke alarm also requires a rise in CO concentration, which reduces false alarms.

  + Add to quote request
• 

  Panasonic · 41292

  Panasonic 4408W heat detector

  Analogue addressable heat detector for Panasonic EBL fire alarm systems. The alarm algorithm is selected from class A1, A2S or BS according to the normal temperature of the room.

  + Add to quote request
• 

  Panasonic · 41301

  Panasonic 4409 IP67 addressable heat detector

  Analogue addressable heat detector in a watertight IP67 housing. Intended for outdoor areas and damp indoor premises; the alarm class is selected from A1, A2S or BS.

  + Add to quote request
• 

  Panasonic · 41341

  Panasonic 4412F mounting base with additional terminals, white

  White analogue mounting base for the Panasonic 4400I and 4401I detectors with built-in short-circuit isolators. Push-in terminals for the COM loop, ceiling mounting in dry indoor premises.

  + Add to quote request
• Panasonic

  Panasonic · 41344

  Panasonic 4412F-B mounting base with additional terminals, black

  Matt black analogue mounting base for the Panasonic 4400I and 4401I detectors with built-in short-circuit isolators. Push-in terminals for the COM loop, ceiling mounting in dry indoor premises.

  + Add to quote request
• 

  Panasonic · 41345

  Panasonic 4412J low-profile mounting base with push-in terminals

  White analogue mounting base for the Panasonic 4400I and 4401I detectors with built-in short-circuit isolators. Push-in terminals for the COM loop, ceiling mounting in dry indoor premises.

  + Add to quote request
• 

  Panasonic · 41346

  Panasonic 4412S low-profile mounting base with screw terminals

  White analogue mounting base for the Panasonic 4400I and 4401I detectors with built-in short-circuit isolators. Screw terminals for the COM loop, ceiling mounting in dry indoor premises.

  + Add to quote request
• Panasonic

  Panasonic · 40404

  Panasonic 4417 connection board, 25 pcs

  The 4417 connection board allows an external indicator to be connected to the analogue 4412F or 4412J base with a two-wire cable. The 4417 is small enough to be hidden inside the base after connection.

  + Add to quote request
• 

  Panasonic · 41402

  Panasonic 4418 addressable remote indicator

  Addressable remote indicator that shows the alarm of a detector that is concealed or out of sight. Connected to the COM loop directly or via a detector base.

  + Add to quote request
• 

  Panasonic · 41380

  Panasonic 4433FI addressable manual call point

  Addressable manual call point with a built-in short-circuit isolator for Panasonic fire alarm systems. Intended for dry indoor premises for immediate manual activation of a fire alarm.

  + Add to quote request
• Panasonic

  Panasonic · 42660

  Panasonic 4434 manual call point test key, 10 pcs

  Test key for Panasonic addressable manual call points 4433 and 4439 and the equivalent models 3333 and 3339. The key is used to test the call point and to remove the front cover for glass replacement. Pack of 10.

  + Add to quote request
• Panasonic

  Panasonic · 42640

  Panasonic 4435 spare glass MCP 46xx, 10 pcs

  Spare glass for 46xx series manual call points, 10 pcs.

  + Add to quote request
• Panasonic

  Panasonic · 42641

  Panasonic 4436 key MCP 4614

  Key for the Panasonic 4614 manual call point.

  + Add to quote request
• 

  Panasonic · 41390

  Panasonic 4439FI IP66 enclosed addressable manual call point

  Enclosed addressable manual call point with short-circuit isolator for outdoor areas and damp premises. The electronics are fully potted, and when installed with the seal the enclosure rating is IP66.

  + Add to quote request
• 

  Panasonic · 41416

  Panasonic 4445 addressable local alarm acknowledgement button

  Addressable local alarm acknowledgement button for apartments and similar premises. The resident acknowledges a local smoke alarm and airs the room before the alarm is transmitted to the fire brigade.

  + Add to quote request
• 

  Panasonic · 41371

  Panasonic 4462 two-input unit with short-circuit isolator

  Addressable unit with two general-purpose inputs and a built-in short-circuit isolator. Monitors the contacts of a sprinkler system or other equipment, for example; powered from the COM loop, IP65 enclosure.

  + Add to quote request
• Panasonic

  Panasonic · 42391

  Panasonic 4463 DIN rail mounting adapter, 10 pcs

  Mounting adapter with DIN rail fixing. Suitable for the 4461 and 4462 I/O units.

  + Add to quote request
• 

  Panasonic · 41389

  Panasonic 4479 addressable base sounder

  Addressable base sounder for the 4400I multi-sensor detector. Brings a 90 dB(A) alarm sound into the same space as the detector; seven tones and three priority levels.

  + Add to quote request
• 

  Panasonic · 41393

  Panasonic 4480RE addressable wall-mounted beacon, red

  Addressable EN 54-23 wall-mounted beacon with a built-in short-circuit isolator. Coverage W-2.4-5.0, i.e. 5 × 5 m, for corridors, offices and toilets, for example.

  + Add to quote request
• 

  Panasonic · 41394

  Panasonic 4481RE addressable ceiling-mounted beacon, red

  Addressable EN 54-23 ceiling-mounted beacon with a built-in short-circuit isolator. Coverage C-3-7.3, i.e. Ø 7.3 m, for corridors, offices and toilets, for example.

  + Add to quote request
• 

  Panasonic · 41395

  Panasonic 4482WH addressable sounder beacon, white

  Addressable wall-mounted sounder beacon: an EN 54-3 sounder and an EN 54-23 visual alarm device in one unit, with a built-in short-circuit isolator. Powered from the COM loop.

  + Add to quote request
• 

  Panasonic · 41398

  Panasonic 4487RE addressable sounder, red

  Addressable wall-mounted sounder with a built-in short-circuit isolator. Seven tones and three priority levels, for example for pre-warning, fire alarm and heavy smoke alarm.

  + Add to quote request
• 

  Panasonic · 41397

  Panasonic 4487WH addressable sounder, white

  Addressable wall-mounted sounder with a built-in short-circuit isolator. Seven tones and three priority levels, for example for pre-warning, fire alarm and heavy smoke alarm.

  + Add to quote request
• 

  Panasonic · 41511

  Panasonic 4611 wireless optical smoke detector

  Wireless optical smoke detector for Panasonic EBL fire alarm systems. The detector communicates via base unit 4620 and suits sites where cabling is difficult.

  + Add to quote request
• 

  Panasonic · 41513

  Panasonic 4612 battery for wireless detectors

  3 V lithium battery for Panasonic wireless fire alarm devices: smoke detector 4611, manual call point 4614 and acknowledgement button 4645. Spare part for battery replacement.

  + Add to quote request
• 

  Panasonic · 41512

  Panasonic 4613 wireless network planning tool

  USB radio signal measuring device (sniffer) for the design, installation and commissioning of Panasonic wireless fire alarm systems. Used with the EBLsniffer software.

  + Add to quote request
• 

  Panasonic · 41514

  Panasonic 4614 wireless manual call point

  Wireless manual call point for Panasonic EBL fire alarm systems. The call point is connected to the system via base unit 4620 and suits sites where cabling is difficult.

  + Add to quote request
• 

  Panasonic · 41519

  Panasonic 4620 addressable base unit for wireless devices

  Addressable base unit for connecting wireless detectors and call points to the COM loop of a Panasonic EBL fire alarm system. One base unit serves a maximum of 16 wireless units.

  + Add to quote request
• 

  Panasonic · 41515

  Panasonic 4645 wireless local alarm acknowledgement button

  Wireless local alarm acknowledgement button for Panasonic EBL fire alarm systems. The button lets the user acknowledge a local alarm caused by cooking, for example, before the fire brigade is alerted.

  + Add to quote request
• Panasonic

  Panasonic · 42122

  Panasonic 6212 deep mounting plate, 5 pcs

  Deep mounting plate for concrete ceilings. Cable installation conduits can be connected to the plate.

  + Add to quote request
• Panasonic

  Panasonic · 42124

  Panasonic 6228 detector heater

  Self-regulating heater that prevents condensation in the detector in cold or damp indoor premises. Installed behind the detector mounting base.

  + Add to quote request
• 

  Panasonic · 41480

  Panasonic 6295 IP67 conventional heat detector 57 °C

  Conventional fixed-temperature heat detector with an alarm temperature of 57 °C. The IP67-rated detector is intended for outdoor areas and indoor premises with high humidity.

  + Add to quote request
• 

  Panasonic · 41490

  Panasonic 6296 IP67 conventional heat detector 72 °C

  Conventional fixed-temperature heat detector with an alarm temperature of 72 °C. The IP67-rated detector is intended for outdoor areas and indoor premises with high humidity.

  + Add to quote request
• 

  Panasonic · 41500

  Panasonic 6297 IP67 conventional heat detector 87 °C

  Conventional fixed-temperature heat detector with an alarm temperature of 87 °C. The IP67-rated detector is intended for outdoor areas and indoor premises with high humidity.

  + Add to quote request
• 

  Panasonic · 41510

  Panasonic 6298 IP67 conventional heat detector 117 °C

  Conventional fixed-temperature heat detector with an alarm temperature of 117 °C. The IP67-rated detector is intended for outdoor areas and indoor premises with high humidity.

  + Add to quote request
• 

  Panasonic · 42125

  Panasonic 6362 detector service lift

  Rope lift kit for lowering a detector mounted on a high ceiling, together with its mounting base, for testing, maintenance or replacement. Suitable for Panasonic base-mounted smoke and heat detectors.

  + Add to quote request
• 

  Panasonic · 42400

  Panasonic 6377 UG-4 duct detector housing

  Duct detector housing (Uniguard-4) for detecting smoke in ventilation ducts. A smoke detector is fitted in the housing, and a venturi tube leads air from the duct through the detector.

  + Add to quote request
• Panasonic

  Panasonic · 42410

  Panasonic 6380-06 venturi tube for duct detector, 0.6 m

  0.6 metre venturi tube for the Panasonic 6377 (Uniguard-4) duct detector housing. The tube leads air from the ventilation duct through the smoke detector in the housing.

  + Add to quote request
• Panasonic

  Panasonic · 42411

  Panasonic 6381-06 fan tube for duct detector, 0.6 m

  0.6 metre venturi tube with a built-in fan for the Panasonic 6377 (Uniguard-4) duct detector housing. Used in ducts where the airflow is too low for a standard tube.

  + Add to quote request
• Panasonic

  Panasonic · 42440

  Panasonic 6382 mounting bracket for duct detector

  Mounting bracket (UG bracket) for Uniguard-4 duct detector housing 6377. Used on round and insulated ventilation ducts, where the duct diameter can be as small as 100 mm.

  + Add to quote request
• Panasonic

  Panasonic · 42460

  Panasonic 6384 filter for duct detector, 10 pcs

  Filter for the Panasonic 6377 duct detector, pack of 10.

  + Add to quote request
• Panasonic

  Panasonic · 42465

  Panasonic 6385 tube grommet

  Rubber seal for the duct detector venturi tube penetration. Used when the tube of the Panasonic 6377 duct detector housing passes through the entire duct and exits on the opposite side.

  + Add to quote request
• Panasonic

  Panasonic · 42412

  Panasonic 6386 extension tube for duct detector, 1.06 m

  1.06 metre extension tube for the venturi tube of the Panasonic 6377 (Uniguard-4) duct detector housing. The extension tube is used in ventilation ducts wider than 0.6 metres.

  + Add to quote request
• 

  Panasonic · 41400

  Panasonic FL/BL/W/D blue sounder beacon, 24 V

  Panasonic FL/BL/W/D is a 24 V sounder beacon with a blue lens and a white body.

  + Add to quote request
• 

  Panasonic · 41405

  Panasonic SO/B/DW10C Solex Xenon beacon, blue

  Solex Xenon beacon, blue.

  + Add to quote request
• Pepperl+Fuchs

  Pepperl+Fuchs · 42076

  Pepperl+Fuchs Z928 Zener barrier for fire bells

  Single-channel Zener barrier (Pepperl+Fuchs Z928) that separates the lines of intrinsically safe fire bells and sounders located in Ex areas from the safe area.

  + Add to quote request
• 

  Panasonic · 42040

  ROLP/R/D Roshni sounder with deep mounting base, IP65

  Roshni sounder with a deep mounting base. Rated IP65.

  + Add to quote request
• 

  Panasonic · 42030

  ROLP/R/S Roshni with low-profile mounting base

  Roshni sounder with a low-profile mounting base.

  + Add to quote request
• 

  Panasonic · 42050

  ROLP/R1/LX-W/RF outdoor sounder with beacon

  Sounder with a red beacon for outdoor use. Rated IP65.

  + Add to quote request
• 

  Panasonic · 42061

  SOL-LX-C/RF/R1/S ceiling-mounted beacon (Solista LX)

  Red Solista LX beacon for ceiling mounting, EN 54-23.

  + Add to quote request
• 

  Panasonic · 42060

  SOL-LX-W/RF/R1/S wall-mounted beacon (Solista LX)

  Red Solista LX beacon for wall mounting, EN 54-23.

  + Add to quote request

Show more