Panasonic
Panasonic 4409 IP67 addressable heat detector
Product code 41301
Analogue addressable heat detector in a watertight IP67 housing. Intended for outdoor areas and damp indoor premises; the alarm class is selected from A1, A2S or BS.
- Watertight IP67 housing for outdoor and damp premises
- Selectable alarm algorithms: A1, A2S and BS (EN 54-5)
- Connection for an external indicator, e.g. 2218
- Dedicated junction box with cable glands for ceiling mounting
- Approved to EN 54-5
✓ In quote request: pcs ·
✓ On your document list · Select and download documents
The product sheet opens in a new tab, where you can print or save it.
A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi
A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi
Product description
Panasonic 4409 is an analogue addressable heat detector with a watertight (IP67) housing. The detector is intended for outdoor areas and damp indoor premises. It must not be installed in strong sunlight or in rooms where the temperature drops below −20 °C. Temperature is measured with a thermistor in the range 0–100 °C in 0.5 °C steps.
The alarm algorithm is selected in EBLWin from three classes in accordance with EN 54-5: A1 (alarm at 56 °C, or at 46 °C with a rapid rise of more than 4 °C/min), A2S (60 °C) or BS (74 °C). In class BS, the detector is suitable for rooms where the typical temperature can be as high as 40 °C. The detector LED lights up in an alarm, and an external indicator can be connected, for example remote indicator 2218 (terminals E+ and E−, current max. 2.6 mA).
Installation
- The junction box is mounted on the ceiling; screws are not included
- Cables are brought in through compression glands (tightened to at least 4 Nm); for cables under 6 mm, use the rubber tube supplied
- The COM loop is connected to the SA/SB terminals of the box, and the detector is fixed to the box with two screws
- Address 001–253 is set with tool 4414 or 4414E before connection to the loop
- NORMAL mode: EBL512 G3, EBL128 and EBLOne V ≥ 3.3
Technical data
- Product code
- 41301
- Manufacturer
- Panasonic
- Product group
- Fire alarm systems › Field devices › Detectors
- Colour
- Grey (Munsell N8)
- Weight
- 112 g
- Dimensions
- Ø 100 × 78 mm
- LED
- Red
- IP rating
- IP67
- Operating temperature
- −20…+50 °C (A1, A2S), −20…+65 °C (BS)
- EN 54 approval
- EN 54-5 (A1, A2S, BS)
- VdS approval
- G222045 (valid until 3 November 2026)
- CPR
- 0786-CPR-21764
- Storage temperature
- −45…+70 °C
- Humidity
- Max. 95% RH, non-condensing
- Material
- Modified polycarbonate
- Operating voltage
- 12–30 V DC (nominal 24 V DC)
- Current consumption (quiescent)
- 0.185 mA
- Current consumption (alarm)
- 2.3 mA (≤ 3.65 mA with external indicator)
- Alarm temperature
- A1: 56 °C / 46 °C, A2S: 60 °C, BS: 74 °C
- Detector class
- A1, A2S, BS
- Address range
- 001–253
- Short-circuit isolator
- No
- Connection
- COM loop (SA/SB) and external indicator (E+/E−) in the junction box
- Compatibility
- EBL512 G3, EBL128, EBLOne V ≥ 3.3
- Mounting
- Ceiling mounting on a junction box, outdoor and damp areas
- Standards
- EN 61000-6-3, EN 50130-4, EN IEC 63000 (RoHS)
Documents
Original manufacturer documents (PDF).
Technical datasheets
More products in this product group
- Panasonic
Need help choosing products?
Our sales team will help you choose devices that suit the site and the existing system, and will prepare a quotation. Tell us about the system, the site and the quantities needed.