Panasonic 4412J low-profile mounting base with push-in terminals

Product description

Panasonic 4412J is a white analogue mounting base that is connected to the COM loop of the fire alarm system. The base is intended for Panasonic detectors with a built-in short-circuit isolator: analogue multi-sensor detector 4400I and analogue smoke detector 4401I. The base is mounted on the ceiling in dry indoor premises, and it does not consume current itself.

4412J has push-in terminals for COM loop SA in and out and for SB, so the conductors are connected without tightening screws. The base is lower than 4412F (Ø 102 × 15 mm) and weighs only 42 g. It does not have the additional terminals of 4412F or a cable screen terminal.

The base has a mounting mark for the detector, which also shows the position of the detector LEDs. The base is prepared for mechanical locking of the detector when a locking screw is used in the detector. An address label holder can be fitted in the recess, so the zone and address information or the technical number remains visible when the detector is in place.

Installation

• Ceiling mounting, fixing screws not included
• Conductor size Ø 0.6–1.2 mm (0.28–1.0 mm²)
• Cable screen terminal only on model 4412F
• Other models in the series: 4412F (push-in terminals and additional terminals) and 4412S (screw terminals)