Panasonic
Panasonic 3312FW mounting base with push-in terminals
Product code 41331
White analogue mounting base for Panasonic addressable heat, smoke and multi-sensor detectors. Push-in terminals for the COM loop speed up installation; no connection for an external indicator.
- Suitable for Panasonic analogue 33xx, 43xx and 44xx series detectors
- Push-in terminals for the COM loop (in/out)
- Recess for an address label holder
- Low profile: Ø 102 × 15 mm
- Lightweight, only 41 g
✓ In quote request: pcs ·
✓ On your document list · Select and download documents
The product sheet opens in a new tab, where you can print or save it.
A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi
A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi
Product description
Panasonic 3312FW is a white analogue mounting base that is connected to the COM loop of the fire alarm system. Panasonic analogue heat, smoke and multi-sensor detectors (types 33xx, 43xx and 44xx) can be installed in the base. The base is intended for dry indoor premises and is mounted on the ceiling.
3312FW has blue push-in terminals for the incoming and outgoing COM loop, so the conductors are connected without tightening screws. Unlike models 3312W and 3312FLW, this base has no terminals (E+/E−) for an external indicator. If the site requires a remote indicator, choose 3312FLW or 3312W. The base itself does not consume current, and it has no short-circuit isolator.
An address label holder can be fitted in the recess of the base. The label can show the zone and address information or the technical number, and it remains visible when the detector is in place. The position of the detector’s own LED is marked on the base so that the base can be mounted in the correct orientation.
Installation
- Ceiling mounting, fixing screws not included
- Conductor size in the push-in terminals Ø 0.6–1.25 mm (0.28–1.2 mm²)
- No terminal for the cable screen conductor
Technical data
- Product code
- 41331
- Manufacturer
- Panasonic
- Product group
- Fire alarm systems › Field devices › Detectors
- Colour
- White (Munsell 10Y9/0.5)
- Weight
- 41 g
- Dimensions
- Ø 102 × 15 mm
- Operating temperature
- −10…+50 °C
- Storage temperature
- −20…+70 °C
- Humidity
- Max. 95% RH, non-condensing
- Material
- ABS
- IP rating
- IP51
- Operating voltage
- 12–30 V DC (nominal 24 V DC)
- Current consumption (quiescent)
- 0 mA
- Connection
- Push-in terminals for the COM loop, no external indicator connection
- Wire size
- Ø 0.6–1.25 mm (0.28–1.2 mm²)
- Short-circuit isolator
- No
- Mounting
- Ceiling mounting, dry indoor areas
- Standards
- EN 61000-6-3, EN 50130-4, EN 50581 (RoHS)
Documents
Original manufacturer documents (PDF).
Technical datasheets
Certificates and declarations
More products in this product group
- Panasonic
Need help choosing products?
Our sales team will help you choose devices that suit the site and the existing system, and will prepare a quotation. Tell us about the system, the site and the quantities needed.