Panasonic
Panasonic 3000-015 Fireray 3000 additional detector pack
Product code 41605
Additional detector pack for the Fireray 3000 beam detector: transmitter and receiver without a controller. Used to connect a second detector line (5–120 m) to the same controller.
- Transmitter (clear lens) and receiver (dark lens)
- Second detector on the same Fireray 3000 controller
- Operating range 5–120 m (EN 54-12)
- Laser alignment in the receiver, single-person commissioning
- Light Cancellation Technology to reduce false alarms
- EN 54-12, CPR 0786-CPR-21162
✓ In quote request: pcs ·
✓ On your document list · Select and download documents
The product sheet opens in a new tab, where you can print or save it.
A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi
A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi
Product description
Fireray 3000 is an end-to-end beam detector (smoke detector) based on infrared technology. It is suitable for large, high open spaces and for sites where maintaining ceiling-mounted detectors is difficult. The system consists of a transmitter, a receiver and a controller mounted at low level. This detector pack contains one transmitter (clear lens) and one receiver (dark lens) without a controller, and it is used to extend the system to a two-detector configuration: up to two detectors can be connected to the controller, each with its own fire and fault relays.
Operation
The transmitter sends an infrared beam to the receiver. When smoke weakens the signal below the set threshold, the detector gives an alarm. The operating range is 5–120 m (EN 54-12), and the sensitivity, alarm delay and contamination compensation are set at the controller. The patented Light Cancellation Technology reduces the risk of false alarms, and the detector is suitable for sites where the line of sight is narrow or structures have reflective surfaces.
Installation
The transmitter and receiver have adjustment wheels that allow the beam to be aligned by 10° in both planes; an optional adjustment bracket allows a wider range of adjustment. The laser alignment integrated in the receiver makes installation by one person easier. The transmitter can be powered from the controller, which reduces the need for separate power supplies. Accessories include the protective cage 1000-019 and an anti-condensation heater.
Technical data
- Product code
- 41605
- Manufacturer
- Panasonic
- Product group
- Fire alarm systems › Field devices › Beam detectors
- Contents
- 1 × transmitter (clear lens), 1 × receiver (dark lens)
- Operating range
- 5–120 m (EN 54-12)
- Operating voltage
- 12–36 V DC ±10%
- Current consumption
- Transmitter 8 mA; control unit 14 mA (1 or 2 receivers)
- Weight
- 207 g (transmitter / receiver)
- Dimensions
- 77 × 78 × 161 mm (H × W × D), transmitter / receiver
- Material
- PC (UL94 V2)
- Wavelength
- 850 nm
- Operating temperature
- −10…+55 °C (EN 54-12)
- Humidity
- 93% RH, non-condensing
- Alignment
- Adjustment wheels, 10° adjustment in both planes, laser alignment
- EN 54 approval
- EN 54-12
- CPR
- 0786-CPR-21162
- VdS approval
- G212034
Documents
Original manufacturer documents (PDF).
Technical datasheets
More products in this product group
- Panasonic
- Panasonic
- Panasonic
- Panasonic
Need help choosing products?
Our sales team will help you choose devices that suit the site and the existing system, and will prepare a quotation. Tell us about the system, the site and the quantities needed.