Skip to content
PAP Group, part of ProseroPAP Group, part of Prosero
Search the site

Suggested searches

Quick links

Request a quote
MenuClose
Panasonic 4611 wireless optical smoke detector

Panasonic

Panasonic 4611 wireless optical smoke detector

Product code 41511

Wireless optical smoke detector for Panasonic EBL fire alarm systems. The detector communicates via base unit 4620 and suits sites where cabling is difficult.

  • Wireless 868 MHz, range up to 170 m in open space
  • Built-in programmable buzzer, over 85 dB
  • Battery life approx. 6 years in normal use
  • Registered to base unit 4620, max. 16 units per base unit
  • Removal monitoring and contamination compensation
  • EN 54-7 and EN 54-25

The product sheet opens in a new tab, where you can print or save it.

A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi

A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi

Product description

Panasonic 4611 is a wireless optical smoke detector connected to an addressable EBL fire alarm system (EBL128, EBLOne or EBL512 G3) via addressable base unit 4620. It suits buildings where cables are difficult to conceal, as well as system extensions and temporary premises.

The detector works on the light-scattering principle: smoke passes through an insect mesh and a labyrinth into the measuring chamber, where an IR LED and a photodiode detect it. The alarm threshold is 3.5%/m. The detector automatically compensates for contamination and gives a service warning when the compensation exceeds 2%/m. The built-in buzzer is programmed in EBLWin for three priority levels. Removal of the detector from its mounting base and a drop in battery voltage are shown as faults on the control panel.

Installation

The detector is mounted on the ceiling in the mounting base supplied, and its adjustable antenna is pointed towards the base unit. Each detector uses one COM loop address, and a maximum of 16 wireless units can be registered to one base unit. The device is powered by two 3 V lithium batteries 4612, which are included in the delivery. It is advisable to check the signal quality at the installation site with the wireless network planning tool 4613. Reinforced concrete strongly attenuates the signal, so a separate base unit is recommended for each floor.

Technical data

Product code
41511
Manufacturer
Panasonic
Product group
Fire alarm systems › Field devices › Wireless devices
Colour
White
Weight
165 g (with batteries)
Dimensions
Ø 100 × 45 mm (without antenna), antenna 55 mm
Battery
2 × 3 V lithium, 1,600 mAh (4612)
Frequency range
868 MHz
Operating temperature
−10…+55 °C
Alarm sound
> 85 dB
EN 54 approval
EN 54-7, EN 54-25
CPR
0786-CPR-21392
Material
ABS, polycarbonate
IP rating
IP50
Service life
Batteries approx. 6 years in normal use
Current consumption (quiescent)
30 µA (average)
Range
Up to 170 m in open space (EN 54-25)
Sensitivity
3.5%/m
Humidity
Max. 95% RH, non-condensing

Documents

Original manufacturer documents (PDF).

Technical datasheets

Certificates and declarations

More products in this product group

Need help choosing products?

Our sales team will help you choose devices that suit the site and the existing system, and will prepare a quotation. Tell us about the system, the site and the quantities needed.

Contact sales +358 40 668 7641