Panasonic
Panasonic 4487RE TVK addressable sounder, red
Product code 50023
Red addressable sounder with short-circuit isolator for wall mounting. Seven tone types and three priority levels; the TVK version has additional terminals for the emergency lighting supply voltage.
- Approved to EN 54-3 and EN 54-17
- Sound level up to 93 dB(A), current consumption in alarm 10 mA
- Seven tone types and three priority levels
- Built-in short-circuit isolator
- Addressable, connected directly to the COM loop
- Additional terminals for the emergency lighting supply voltage (TVK)
✓ In quote request: pcs ·
✓ On your document list · Select and download documents
The product sheet opens in a new tab, where you can print or save it.
A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi
A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi
Product description
Panasonic 4487RE is a red addressable sounder with a built-in short-circuit isolator. The sounder is connected directly to the COM loop and mounted on a wall. It is approved to EN 54-3 and EN 54-17 and is intended for dry indoor areas.
Tones and priorities
The sounder has seven selectable tone types, including the DIN 33404, NEN 2575 and NFS 32-001 tones. Each of the three priority levels (high, medium, low) is programmed with EBLWin with its own control condition and tone type. This means the sounder can be used, for example, for pre-warning, fire alarm and heavy smoke alarm with different tones. When a higher-priority condition is met, the tone changes. The maximum sound level is 93 dB(A), and the highest minimum sound pressure level is approximately 90–94 dB(A) at a distance of 1 metre, depending on the tone, and current consumption in alarm is only 10 mA.
Installation
The sounder is mounted on a wall. The address is set automatically with EBLWin or with the 4414/4414E addressing tool before the sounder is connected to the loop. The sounder works with EBL512 G3 and EBL128 control panels (Advanced and NORMAL mode from version 2.3, 2330 mode in all versions) and with EBLOne control panels from version 3.3. The short-circuit isolator is in use in Advanced and NORMAL mode.
TVK version
According to the product information, the TVK version has extra terminals for the emergency lighting power supply. This allows the 24 V supply line of the emergency lighting to be routed through the device along the same route as the COM loop, for example when MX emergency luminaires and exit signs are used.
Technical data
- Product code
- 50023
- Manufacturer
- Panasonic
- Product group
- Emergency lighting › Field devices
- Dimensions
- 109 × 109 × 95 mm
- Weight
- 240 g
- Operating temperature
- −10…+55 °C
- Storage temperature
- −25…+70 °C
- Humidity
- Max. 95% RH, non-condensing
- IP rating
- IP21
- Colour
- Red
- Material
- Flame-retardant ABS and polycarbonate
- Operating voltage
- 12–30 V DC (nominal 24 V DC)
- Current consumption (quiescent)
- 2 mA
- Current consumption (alarm)
- 10 mA
- Input power
- 0.02–0.3 W
- Sound output
- Highest minimum level approx. 90–94 dB(A) at 1 m (depending on tone)
- Tone types
- Continuous 984 Hz, intermittent 984 Hz, alternating 644/984 Hz, DIN 33404, NEN 2575, NFS 32-001, Australian T3
- Address range
- 001–253
- Short-circuit isolator
- Yes
- Mounting
- Wall mounting
- Connection
- Conductor 0.3–1.5 mm²
- EN 54 approval
- EN 54-3, EN 54-17
- CPR
- 0786-CPR-21534
- Standards
- VdS 2344, VdS 2504, EN 61000-6-3, EN 50130-4, EN IEC 63000
- Maximum sound output
- Max. 93 dB(A)
Documents
Original manufacturer documents (PDF).
More products in this product group
Need help choosing products?
Our sales team will help you choose devices that suit the site and the existing system, and will prepare a quotation. Tell us about the system, the site and the quantities needed.