PAP MX IP65 exit sign and emergency luminaire

Product description

MX IP65 is an addressable luminaire that can be used either as an exit sign or as an emergency luminaire. The mode of use is selected with a DIP switch on the luminaire’s circuit board; the factory setting is emergency luminaire. As an exit sign the luminaire is maintained and the whole pictogram is illuminated, with a viewing distance of 25 m. As an emergency luminaire it switches on only during a power failure or emergency. The IP65 ingress protection rating makes it suitable for car parks, industrial premises and outdoor use.

The luminaire is connected to the COM loop of a Panasonic fire alarm system, so the control panel monitors its condition. The internal NiMH battery (2.4 V, 2,400 mAh) provides a rated duration of 3 hours. Automatic function, battery and duration tests and an indicator light show the status of the device. Four pictograms (up, down, left, right) are included in the delivery; for a double-sided sign, the double-sided cover 930016 is available as an accessory, supplied with up and down pictograms.

Installation

The luminaire is mounted on the wall or ceiling. The COM loop is connected to the SA and SB terminals on the circuit board and the 24 V operating voltage to the E+ and E− terminals. The address (1–253) is set with the address setting tool 4414 in NORMAL mode (EBL512 G3). The recommended wire diameter is 0.6–1.2 mm.