Skip to content
PAP Group, part of ProseroPAP Group, part of Prosero
Search the site

Suggested searches

Quick links

Request a quote
MenuClose
Search the site
Request a quoteProducts, systemsPlace an orderMaintenance, accessoriesCall customer service+358 29 000 1112
Front panel of a smartVES power amplifier (pictured: SMART-PA8160E): black 2U rack enclosure, display, indicators and buttons

Ambient System

Ambient System SMART-PA8080 class D power amplifier 8 × 80 W

Product code SMART-PA8080

8-channel class D power amplifier for the smartVES system, 8 × 80 W. 48 V DC supply for a battery-backed system, 100 V and 50 V outputs, 2U rack enclosure. EN 54-16.

  • Approved to EN 54-16, CPR 1438-CPR-0948
  • 8 × 80 W, bridged up to 4 × 160 W
  • Transformer-isolated class D outputs for 100 V and 50 V lines
  • 48 V DC supply from the SMART-PSM48 power management unit
  • Indicators for supply, operation and fault on the front panel
Add to quote request Product sheet (PDF)

The product sheet opens in a new tab, where you can print or save it.

A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi

A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi

Product description

SMART-PA8080 is an 8-channel class D power amplifier of Ambient System’s smartVES system for 100 V and 50 V loudspeaker systems. The outputs are transformer-isolated. The rated power per channel is 80 W. The channels can be bridged, giving outputs of 1 × 160 W + 6 × 80 W, 2 × 160 W + 4 × 80 W, 3 × 160 W + 2 × 80 W or 4 × 160 W.

The amplifier operates on 48 V DC, so it can be connected to a battery-backed supply. Power comes from SMART-PS48800 power supply units via the SMART-PSM48 power management unit. The power management unit includes a battery charger and meets the requirements of EN 54-4.

The rear panel has level controls for each channel, a volt-free general fault contact and the connectors. The enclosure is 2U high and is mounted in a 19-inch rack. This model has no background music (BGM) inputs. The model with background music inputs is SMART-PA8080E.

Technical data

Product code
SMART-PA8080
Manufacturer
Ambient System
Product group
Voice alarm systems › Amplifiers and power supplies
Channels and power
8 × 80 W (rated load 125 Ω / 100 nF, 1 kHz)
Bridged operation
1 × 160 W + 6 × 80 W, 2 × 160 W + 4 × 80 W, 3 × 160 W + 2 × 80 W or 4 × 160 W
Output voltage
100 V or 50 V (screw terminals)
Operating voltage
48 V DC (42–57 V)
Current consumption (48 V)
Standby 0.2 A, operation 0.7 A, max. 20 A
Efficiency
80% (rated power, 1 kHz)
Internal fuses
6 × 7.5 AF-H
Input level
1 V balanced (nominal), max. 3 V
Background music inputs (BGM)
No
Input impedance
22 kΩ
Common-mode rejection
Over 61 dB
Frequency response (−6 dB)
75 Hz–20 kHz
Signal-to-noise ratio
Over 85 dB
Channel crosstalk
Below −70 dB
Connectors
DC input DG58C-A-2P13, audio outputs 3-pole Phoenix 5.08 mm
Indicators
Supply, operation, fault
EN 54 approval
EN 54-16
CPR
1438-CPR-0948
Dimensions
Front panel 482 mm, rear section 445 mm, height 88.5 mm (2U)
Weight
15 kg (net)
Mounting
19-inch rack

Documents

Original manufacturer documents (PDF).

Technical datasheets

User manuals

Certificates and declarations

Compatible products

Need help choosing products?

Our sales team will help you choose devices that suit the site and the existing system, and will prepare a quotation. Tell us about the system, the site and the quantities needed.

Contact sales +358 40 668 7641