Panasonic

Panasonic 6218 damp-area mounting box for detectors

Product code 42120

Moisture protection, i.e. a drip pan, for detectors, installed on the ceiling behind the mounting base and detector. Protects Panasonic smoke and heat detectors from moisture and water dripping from the ceiling.

Protects the detector from moisture and water dripping from the ceiling
Two external mounting flanges seal the joint to the ceiling
Cable glands for cables Ø 6–10 mm included
Fits mounting bases 2324, 3312, 3312F, 3312FL, 4313 and 4412F
IP53

The product sheet opens in a new tab, where you can print or save it.

A quote or help choosing products? Sales+358 40 668 7641 myynti@pap.fi

A technical question about a device? Technical support+358 40 668 7643 tuki@pap.fi

Product description

Panasonic 6218 is a moisture protection for detectors (drip pan), used with Panasonic smoke and heat detectors when the detector is installed in a mounting base. The protection is intended for sites where water may run or drip from the ceiling, or where the detector is exposed to moisture.

The protection has two external mounting flanges, which make the joint with the ceiling tight. Cables are brought in through the supplied cable glands, which are suitable for cables 6–10 mm in diameter. The degree of protection is IP53.

Compatibility

According to the manufacturer, the protection fits mounting bases 2324, 3312, 3312F, 3312FL, 4313 and 4412F. The same protection is also used with the detector heater 6228, in which case the heater plate and, if required, an insulating plate are installed between the protection and the base.