Panasonic
Panasonic 6360 detector guard
Product code 42180
Detector guard that protects a Panasonic detector installed in a mounting base from physical damage in areas where the detector may be subject to impacts or knocks.
- Protects the detector from mechanical damage
- For all Panasonic base-mounted detectors
- M4 locking screw, replaceable with another screw head type
- Lightweight, weight 32 g
✓ In quote request: pcs ·
✓ On your document list · Select and download documents
The product sheet opens in a new tab, where you can print or save it.
A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi
A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi
Product description
Panasonic 6360 is a detector guard that protects the detector from physical damage. It can be used with any Panasonic detector installed in a mounting base.
The guard is intended for premises where the detector could otherwise be damaged, for example by impacts or knocks.
Installation
The guard is fitted over the detector and locked with an M4 locking screw. If required, the screw can be replaced with a screw head type better suited to the site. The dimensions of the guard are Ø 148 × 100 mm and the weight is 32 g.
Operating conditions
The operating temperature is −10…+50 °C and the relative humidity below 95%. The guard does not include a detector or mounting base; these are ordered separately.
Technical data
- Product code
- 42180
- Manufacturer
- Panasonic
- Product group
- Fire alarm systems › Accessories
- Weight
- 32 g
- Dimensions
- Ø 148 × 100 mm
- Operating temperature
- −10…+50 °C
- Humidity
- Below 95% RH
- Lock
- M4 locking screw, replaceable
- Compatibility
- Panasonic base-mounted detectors
Documents
Original manufacturer documents (PDF).
Technical datasheets
More products in this product group
- PAP
- PAP
- PAP Group
Ordering supplies or spare parts?
You can order supplies and spare parts directly using the order form. If you are not sure which product is right, ask our sales team.