Skip to content
PAP Group, part of ProseroPAP Group, part of Prosero
Search the site

Suggested searches

Quick links

Request a quote
MenuClose
Loudspeaker line end-of-line module: black protected circuit board with a green connector and connection leads

Panasonic

Panasonic ABT-EOL loudspeaker line end-of-line module, 10 pcs

Product code ABT-EOL

Loudspeaker line end-of-line module for line monitoring without separate monitoring cabling. Detects open circuits, short circuits and earth faults. Pack of 10 modules.

  • Approved to EN 54-16
  • Open-circuit, short-circuit and earth fault detection
  • No separate monitoring cabling: powered by the amplifier
  • Four power settings (A–D), load capacity 10–480 W
  • Pack of 10 modules

The product sheet opens in a new tab, where you can print or save it.

A quote or help choosing products? Sales+358 40 668 7641myynti@pap.fi

A technical question about a device? Technical support+358 40 668 7643tuki@pap.fi

Product description

ABT-EOL monitors the integrity of a loudspeaker line and all its branches. The module is connected in parallel with the last loudspeaker on the line. On a branched line, each branch needs its own module. The module is a selective load only for the 20 kHz pilot tone, which improves the reliability of loudspeaker monitoring based on impedance measurement.

The module detects open circuits, short circuits and earth faults. It is powered by the amplifier, so no separate monitoring cabling is needed. The module has four power settings (A–D), which are selected according to the result of the manufacturer’s EOL calculator.

According to PAP’s datasheet, ABT-EOL works correctly with the loudspeakers ABT-S106, ABT-S136, ABT-S186, ABT-S206, ABT-S206B, ABT-S2010, ABT-W6, ABT-W6W, ABT-W6/AB, ABT-LA30/60, MCR-SMSP20, ABT-P10 and ABT-P20. The models ABT-S106, ABT-S136 and ABT-S186 require a mounting box.

This product is a pack of 10 modules, as in Panasonic’s PAVA catalogue. The single module is ABT-EOL-1.

Technical data

Product code
ABT-EOL
Manufacturer
Panasonic
Product group
Voice alarm systems › Loudspeakers
Operating mode
Selective load for the 20 kHz pilot tone (line monitoring based on impedance measurement)
Fault detection
Open circuit, short circuit, earth fault
Operating voltage
100 V loudspeaker line
Load capacity
10–480 W, four power settings (A–D)
Connection
20 cm connection leads, Phoenix 3.5 mm
Mounting
Inside the loudspeaker or in a separate mounting box
Operating temperature
−10…+55 °C
Storage temperature
−40…+70 °C
Humidity
Below 95%
Dimensions
65 × 16 × 37 mm (W × H × D)
Weight
Approx. 46 g (10 modules approx. 500 g)
EN 54 approval
EN 54-16
CPR
1438-CPR-0527 (Ambient miniVES/midiVES)
Pack size
10 pcs

Documents

Original manufacturer documents (PDF).

Installation guides

Compatible products

Need help choosing products?

Our sales team will help you choose devices that suit the site and the existing system, and will prepare a quotation. Tell us about the system, the site and the quantities needed.

Contact sales +358 40 668 7641