> Panasonic 6360 detector guard against impacts
> Source: https://pap.fi/en/tuote/panasonic-ilmaisin-suojus-6360/
> Full site in machine-readable form (in Finnish): https://pap.fi/llms-full.txt
> Pages in English: https://pap.fi/llms.txt

# Panasonic 6360 detector guard

Product code 42180

Detector guard that protects a Panasonic detector installed in a mounting base from physical damage in areas where the detector may be subject to impacts or knocks.

-   Protects the detector from mechanical damage
-   For all Panasonic base-mounted detectors
-   M4 locking screw, replaceable with another screw head type
-   Lightweight, weight 32 g

## Product description

Panasonic 6360 is a detector guard that protects the detector from physical damage. It can be used with any Panasonic detector installed in a mounting base.

The guard is intended for premises where the detector could otherwise be damaged, for example by impacts or knocks.

### Installation

The guard is fitted over the detector and locked with an M4 locking screw. If required, the screw can be replaced with a screw head type better suited to the site. The dimensions of the guard are Ø 148 × 100 mm and the weight is 32 g.

### Operating conditions

The operating temperature is −10…+50 °C and the relative humidity below 95%. The guard does not include a detector or mounting base; these are ordered separately.

## Technical data

- **Product code:** 42180
- **Manufacturer:** Panasonic
- **Product group:** Fire alarm systems › Accessories
- **Weight:** 32 g
- **Dimensions:** Ø 148 × 100 mm
- **Operating temperature:** −10…+50 °C
- **Humidity:** Below 95% RH
- **Lock:** M4 locking screw, replaceable
- **Compatibility:** Panasonic base-mounted detectors

## Documents

Original manufacturer documents (PDF).

### Technical datasheets

-   [Product brochure: Panasonic 6360 detector guard](https://pap.fi/liitteet/valmistajat/panasonic-fire-security__ll_6360_mew01966_rev_.pdf) PDF · English · 233 kB