> Panasonic 5047 EBL512 G3 power supply LS150-24
> Source: https://pap.fi/en/tuote/panasonic-5047-virtalahde-5047-ebl512-g3/
> Full site in machine-readable form (in Finnish): https://pap.fi/llms-full.txt
> Pages in English: https://pap.fi/llms.txt

# Panasonic 5047 EBL512 G3 power supply LS150-24

Product code 42650

Switch-mode power supply LS150-24 for the Panasonic EBL512 G3 fire alarm control panel. Sold as a spare part, the power supply converts the 230 V AC mains voltage to 24 V DC and is connected to the panel’s main board.

-   Main power supply of the control panel, type LS150-24
-   230 V AC, 2.0 A / 24 V DC, 6.5 A
-   Input voltage 195–253 V AC
-   Main board fuse limits the current to 6.3 A
-   Spare part for EBL512 G3 control panels 5000 and 5001

## Product description

Panasonic 5047 is the power supply of the EBL512 G3 fire alarm control panel. It is the LS150-24 switch-mode power supply built into the control panel, which acts as the main power source of the panel. The product is intended as a spare part.

The power supply is connected to the 230 V AC mains (195–253 V AC, 2.0 A) and delivers 24 V DC at up to 6.5 A. Fuse F1 on the main board limits the current to 6.3 A. The power supply and the standby batteries are connected to the main board, which handles battery charging. Up to 2.5 A is available for connected devices in quiescent state and up to 6.0 A in fire alarm state.

### Installation

The mains connection is made to a resettable final circuit fuse of max. 10 A that is dedicated to the fire alarm control panel only and labelled in accordance with national regulations. The building installation must include an all-pole disconnect switch with a contact separation of at least 3 mm. Mains and 24 V wiring are kept separate with cable ties. The control panel has two power sources: before carrying out maintenance, disconnect the mains voltage and remove battery fuse F2.

## Technical data

- **Product code:** 42650
- **Manufacturer:** Panasonic
- **Product group:** Fire alarm systems › Spare parts
- **Type:** Switch-mode power supply LS150-24
- **Operating voltage:** 230 V AC (195–253 V AC), 2.0 A
- **Output voltage:** 24 V DC
- **Output current:** Max. 6.5 A (limited to 6.3 A by the main board fuse)
- **Connection:** Main board terminal block J2
- **Compatibility:** EBL512 G3 5000 and 5001

## Documents

Original manufacturer documents (PDF).

### Technical datasheets

-   [Technical datasheet (series): EBL512 G3 5000 and 5001](https://pap.fi/liitteet/valmistajat/panasonic-fire-security__en_td_5000_5001_mew02399_rev_8.pdf) PDF · English · 4.0 MB