> Panasonic 4408W addressable heat detector
> Source: https://pap.fi/en/tuote/panasonic-4408w-lampoilmaisin-osoitteellinen-valk/
> Full site in machine-readable form (in Finnish): https://pap.fi/llms-full.txt
> Pages in English: https://pap.fi/llms.txt

# Panasonic 4408W heat detector

Product code 41292

Analogue addressable heat detector for Panasonic EBL fire alarm systems. The alarm algorithm is selected from class A1, A2S or BS according to the normal temperature of the room.

-   Selectable alarm algorithms: A1, A2S and BS (EN 54-5)
-   Thermistor measurement 0–100 °C with 0.5 °C resolution
-   Fits analogue mounting bases 3312x, 4313 and 3379
-   Spare part replacing a 2330 system heat detector (2330 mode)
-   Approved to EN 54-5

## Product description

Panasonic 4408W is a white analogue addressable heat detector that measures temperature with a thermistor in the range 0–100 °C in 0.5 °C steps. The detector is intended for dry indoor premises and works in EBL512 G3, EBL128 and EBLOne systems.

In NORMAL mode, the alarm algorithm is selected in EBLWin from three classes in accordance with EN 54-5. The class is chosen according to the typical temperature of the room: BS suits warm rooms where the normal temperature can be as high as 40 °C. The classes are A1 (operating range 54–65 °C, alarm at 56 °C, or at 46 °C with a rapid rise of more than 4 °C/min), A2S (54–70 °C, alarm at 60 °C) and BS (69–85 °C, alarm at 74 °C).

Two red LEDs flash in an alarm, and the green polling LED can be set to flash or stay off. In 2330 mode, the detector can be used as a spare part in place of an old 2330 mounting base and heat detector (class A2S).

### Installation

-   Fitted in analogue mounting base 3312x, 4313 or base sounder 3379
-   The COM loop and an external indicator are connected to the mounting base
-   Locking screw included; a 2.5–2.7 mm hole is drilled to lock the base
-   Address 001–253 and mode are set with tool 4414 or 4414E before connection to the loop

## Technical data

- **Product code:** 41292
- **Manufacturer:** Panasonic
- **Product group:** Fire alarm systems › Field devices › Detectors
- **Colour:** White (Munsell 10Y9/0.5)
- **Weight:** 65 g
- **Dimensions:** Ø 102 × 34 mm
- **LED:** 2 red (alarm), 1 green (polling)
- **Operating temperature:** −20…+50 °C (A1, A2S), −20…+65 °C (BS)
- **EN 54 approval:** EN 54-5 (A1, A2S, BS)
- **VdS approval:** G222044 (valid until 3 November 2026)
- **CPR:** 0786-CPR-21763
- **Storage temperature:** −25…+70 °C
- **Humidity:** Max. 95% RH, non-condensing
- **Material:** Flame-retardant ABS and polycarbonate
- **IP rating:** IP51
- **Operating voltage:** 12–30 V DC (nominal 24 V DC)
- **Current consumption (quiescent):** 0.3 mA
- **Current consumption (alarm):** 2.3 mA (4.3 mA with external indicator)
- **Alarm temperature:** A1: 56 °C / 46 °C, A2S: 60 °C, BS: 74 °C
- **Detector class:** A1, A2S, BS
- **Address range:** 001–253
- **Short-circuit isolator:** No
- **Compatibility:** EBL512 G3, EBL128, EBLOne V ≥ 3.3
- **Mounting:** In base 3312x, 4313 or 3379
- **Standards:** EN 61000-6-3, EN 50130-4, EN IEC 63000 (RoHS)

## Documents

Original manufacturer documents (PDF).

### Technical datasheets

-   [Technical datasheet: 4408W heat detector](https://pap.fi/liitteet/tuotteet/en_td_4408_mew02742_rev_1.pdf) PDF · English · 723 kB

### Certificates and declarations

-   [EU declaration of conformity, no. ESSC-F00031-01](https://pap.fi/liitteet/tuotteet/doc_4408_essc_f00031_01.pdf) PDF · English · 244 kB
-   [CPR certificate of constancy of performance, no. 0786-CPR-21763](https://pap.fi/liitteet/tuotteet/cpr_4408_0786_cpr_21763.pdf) PDF · multilingual · 2.0 MB valid until further notice
-   [VdS approval, no. G 222044](https://pap.fi/liitteet/tuotteet/vds_4408_g222044_exp_2026_11_03.pdf) PDF · multilingual · 1007 kB valid 4 November 2022 – 3 November 2026
-   [Declaration of performance (DoP), no. 0786-CPR-21763 (document ID ESSC-FP0031-1)](https://pap.fi/liitteet/tuotteet/dop_4408_essc_fp0031_01.pdf) PDF · English · 541 kB