> Panasonic 4383 addressable beacon base
> Source: https://pap.fi/en/tuote/panasonic-4383-vilkkukanta-osoitteellinen/
> Full site in machine-readable form (in Finnish): https://pap.fi/llms-full.txt
> Pages in English: https://pap.fi/llms.txt

# Panasonic 4383 beacon base

Product code 41413

Addressable beacon base installed between an analogue detector base and the detector. Eight red LEDs give a light signal visible through 360° to support sounders.

-   Installed between a 3312x, 4313 or 3379 base and the detector
-   No separate cabling: the loop is connected to the base
-   Eight red LEDs, light visible through 360° horizontally
-   Own COM loop address, programmable activation conditions
-   Low current consumption: quiescent 1.5 mA, alarm 3.5 mA

## Product description

Panasonic 4383 is an addressable light indicator that is installed between an analogue detector base and the detector. It is intended to supplement sounders: eight red LEDs in a transparent ABS housing give a light signal that is visible through 360° horizontally. The beacon base is intended for dry indoor premises.

The beacon base is fitted to analogue base 3312, 3312F, 3312FL or 4313 or to base sounder 3379, and the detector is installed on top of it. The COM loop and any external indicator are connected to the base, so the beacon base needs no cabling of its own. It does, however, have its own COM loop address, which must not be the same as that of the detector in the base, and its activation is programmed in the fire alarm control panel. The flash frequency is 1 Hz, and the current consumption is 1.5 mA in the quiescent state and 3.5 mA in alarm, so the beacon base places only a small load on the loop.

### Compatibility and installation

-   The address 001–253 and the operating mode are set with the 4414 address setting tool before connection to the loop
-   NORMAL mode: EBL512 G3, EBL128, EBL512, EBLOne and United system (configured as type 4380)
-   No short-circuit isolator

## Technical data

- **Product code:** 41413
- **Manufacturer:** Panasonic
- **Product group:** Fire alarm systems › Field devices › Alarm devices
- **Weight:** 90 g
- **Dimensions:** Ø 102 × 28 mm
- **Flash rate:** 1 Hz
- **Operating temperature:** −10…+55 °C
- **Storage temperature:** −25…+70 °C
- **Humidity:** Max. 95% RH, non-condensing
- **Colour:** Transparent
- **Material:** Flame-retardant ABS
- **IP rating:** IP21C
- **Operating voltage:** 12–30 V DC (nominal 24 V DC)
- **Current consumption (quiescent):** 1.5 mA
- **Current consumption (alarm):** 3.5 mA
- **Light source:** 8 red LEDs
- **Address range:** 001–253
- **Short-circuit isolator:** No
- **Mounting:** Between the analogue base (3312x, 4313, 3379) and the detector
- **Standards:** EN 61000-6-3, EN 50130-4, EN IEC 63000 (RoHS)

## Documents

Original manufacturer documents (PDF).

### Technical datasheets

-   [Technical datasheet: 4383 beacon base](https://pap.fi/liitteet/tuotteet/en_td_4383_mew01888_rev_2.pdf) PDF · English · 964 kB

### Certificates and declarations

-   [EU declaration of conformity, no. ESN-F00304-04](https://pap.fi/liitteet/tuotteet/doc_4383_esn_f00304_04.pdf) PDF · English · 252 kB